news

Anchor bolt installation

Update:28-02-2020
Summary:

First, first, professional technicians should follow th […]

First, first, professional technicians should follow the relevant design requirements, so as to formulate standards that meet the requirements for the number, type, type, and material of anchor bolts.

Second, after purchasing the anchor bolts that meet the requirements, we should let the engineering technicians perform the relevant standard measurements. Then, based on the measured data, the position, height, etc. of the anchor bolts that need to be embedded are designed.

Third, before installing the anchor bolts, the staff should first set up a fixed bracket. Only the bottom of the bracket must be welded firmly to form a standard-compliant system. In addition, we must ensure that the fixed bracket has strong stability and sufficient rigidity.

Fourth, after the relevant bracket is fixed, the anchor bolt installation procedure can be started. When installing the anchor bolt, the center position of the anchor bolt must be fixed according to the relevant positioning line. Then start to adjust the places that do not meet the requirements. And take the correct method to reinforce it firmly.

Fifth, after the anchor bolts are installed, the staff should use professional measuring equipment to adjust the anchor bolts multiple times. Ensure that the level and level of the anchor bolts meet the requirements.

Sixth, after confirming that all the anchor bolts are installed, and after detailed inspection to ensure that the relevant requirements are met, the bottom of the anchor bolts is welded firmly. Relevant strengthening measures are usually carried out on bolt brackets.

www.xtanchor.com

Contact Us