News

  • Related parameters of chemical anchor

    Related parameters of chemical anchor

    Drilling depth: Control of drilling depth is especially important when punching holes. The type and size of the anchor is used to determine the required drilling depth, which is generally greater than the anchoring depth, with a few exceptions. Anchoring depth: The distance from the surface of the a... read more

    Apr 04,2019 Industry News
  • Non-destructive inspection of anchor bolt anchorage quality

    Non-destructive inspection of anchor bolt anchorage quality

    (1) For important structural members, the anchor bolts of the inspection lot shall be randomly sampled on the basis of checking the appearance quality of the anchors of the inspection lot and according to the sampling quantity specified in Table N.2.3. (2) For general structural members, 50% of the ... read more

    Apr 19,2019 Industry News
  • Why do chemical anchors have to be pulled?

    Why do chemical anchors have to be pulled?

    The role of the chemical anchor is to anchor the fixture, so it raises a problem, that is, the pull strength of the chemical anchor. In order to verify whether the drawing strength of the chemical anchor can withstand the horizontal horizontal tension of the substrate and the pendant and the vertica... read more

    Apr 30,2019 Industry News
  • Advantages of the anchor foundation

    Advantages of the anchor foundation

    1 . Convenient construction, short procurement cycle and simple process; 2 . Overcome the shortcomings of the strength of the foundation ring, sudden changes in stiffness, and easy brittle failure; 3 . The prestressed structure is safer and more reliable, and the concrete is under pressure for a lon... read more

    May 11,2019 Industry News
  • The bolt anchor construction is as follows

    The bolt anchor construction is as follows

    1. Positioning Before the construction preparation, the design and construction drawings should be carefully read. The structural surface must be cleaned up. According to the design drawings, the drilling position of the steel anchorage points should be marked by the line. After the drilling positio... read more

    May 17,2019 Industry News
Contact Us