News

  • Anchor bolt installation method

    Anchor bolt installation method

    1. One-time embedding method: When pouring concrete, embed the anchor bolts. When the tower is controlled by the overturning, the anchor bolt should adopt the one-time embedding method. 2. Reserved hole method: the equipment is in place, the hole is cleaned, the anchor bolt is placed in the hole, an... read more

    Aug 10,2019 Industry News
  • Spatial relationship between anchor bolts and steel bars

    Spatial relationship between anchor bolts and steel bars

    When installing the anchor bolts, the first step is to first find the position of the top of the anchor bolts. The error range is between three and four millimeters, which must be within this range. Wait until the initial verticality is determined to fix the tie bars or the adjustable steel bars. Af... read more

    Aug 16,2019 Industry News
  • Elevation control positioning of anchor bolts

    Elevation control positioning of anchor bolts

    The anchor bolt is one of the mainstream pre-embedded parts. It is mainly used in the construction of the building base. When the anchor bolt is embedded, it also needs to be operated in strict accordance with the pre-specified requirements. Today we mainly talk about the control of the anchor bolt ... read more

    Aug 24,2019 Industry News
  • How to deal with the deviation of the anchor bolt height

    How to deal with the deviation of the anchor bolt height

    1. When the bolt is too high, the upper part must be divided to re-thread. When threading, it is necessary to prevent the oil from dripping onto the concrete foundation and affecting the quality of the foundation. 2. When the bolt is low and the deviation value is not large (within 15mm), the bolt c... read more

    Aug 30,2019 Industry News
  • Quality requirements and control of chemical anchor construction

    Quality requirements and control of chemical anchor construction

    1. It is best to use a drill bit that matches the anchor bolt when drilling. The drill bit uses the model of the drilled concrete. When drilling, the steel bar must be avoided. One is to prevent the main rib from being injured, and the other is to prevent the drill bit from being injured. 2. Before ... read more

    Sep 06,2019 Industry News
Contact Us