News

  • How to deal with the anchor bolt center deviation

    How to deal with the anchor bolt center deviation

    When the diameter of the anchor bolt is below 30mm and the centerline is offset within 30mm, the bolt can be red-baked with oxyacetylene, and then the bolt can be bent with a sledgehammer (or bent with a jack). After correction, it should be strengthened with steel plate. To prevent recovery when ti... read more

    Sep 12,2019 Industry News
  • Anchor bolt reinforcement - clear hole

    Anchor bolt reinforcement - clear hole

    (1) After the drilling is completed, clean the dust within the radius of 0.5 m around the hole, and clean the hole with a gas pump and a brush. In this process, three blows and two brushes are required, that is, the blow hole is three times, the brush is cleaned twice, and the cleaning is completed.... read more

    Sep 21,2019 Industry News
  • Anchor bolt reinforcement - steel bar cleaning

    Anchor bolt reinforcement - steel bar cleaning

    (1) Mark the corresponding position of the end of the steel bar to mark the length range of the rust cleaning; this length range is required to be greater than the required anchoring depth of 50mm. (2)Start the sander and use a wire brush to polish the surface of the steel bar within the length of t... read more

    Sep 30,2019 Industry News
  • How to check the quality of the anchor bolts

    How to check the quality of the anchor bolts

    The quality of the anchor bolts needs to be strictly monitored. Because the anchor bolts are pre-embedded fasteners, the anchor bolts are usually pre-buried in the foundation part of the building. After the installation, the concrete needs to be pre-buried, so once the anchor bolts are installed, it... read more

    Oct 12,2019 Industry News
  • Use of anchor bolts

    Use of anchor bolts

    1. Fixed anchor bolts, also known as short anchor bolts, are poured with the foundation to hold equipment without strong vibration and shock. 2. The movable anchor bolt, also known as the long anchor bolt, is a detachable anchor bolt for fixing heavy mechanical equipment with strong vibration and im... read more

    Oct 19,2019 Industry News
Contact Us